CP-DOUBLFOOTSTAND (CP-DOUBLEFOOTSTAND)
Supported Configuration: One CP-7960G IP Phone + Two CP-7914 Key Expansion Modules


Product Description

When adding the CP-7914 expansion module, a replacement footstand and an additional power supply are required. If one CP-7914 is being added, a CP-SINGLFOOTSTAND and a single power supply (3RD-PWR-CUBE or CP-PWR-CUBE) is needed. If two CP-7914's are being added, a CP-DOUBLFOOTSTAND and two power supplies are needed. The only tool required for installation of the Cisco 7914 is a flat blade screwdriver or other appropriate tool to unlatch the pins securing the standard footstand.


About the Cisco CP-7914 Expansion Module:

The Cisco IP Phone Expansion Module 7914 extends the capabilities of the Cisco IP Phones 7960G, 7961G, 7970G and 7971G-GE with additional buttons and an LCD display. With this expansion module, you add 14 buttons to the existing six buttons of the Cisco IP Phones 7960 and 7961G and the existing eight buttons of the Cisco IP Phones 7970G and 7971G-GE, increasing the total number of buttons when you add one or two Cisco 7914 Expansion Modules. You can use up to two Cisco 7914 Expansion Modules with a Cisco IP Phones 7960G, 7961G, 7970G or 7971G-GE.

The large LCD display of the Cisco IP Phone Expansion Module allows for quick and easy identification of associated buttons. Using the Settings menu of the host IP phone you can adjust the contrast of the individual LCDs for the phone and the expansion module according to your preference. The 14 buttons on each Cisco IP Phone Expansion Module 7914 can be programmed as a directory number (DN), line key, or speed-dial key, much like the Cisco IP Phones 7960G, 7961G, 7970G and 7971G-GE. When used as a DN key, buttons are illuminated, allowing easy identification of call state.