As you may know, the new CCNP test requires IOS 12.4 which the
cheaper routers do not support so you will need to step up to the 2600XM series.
So understanding that you may want an advanced CCNA lab kit that you can use as
a starter CCNP kit, we developed this kit for those on a limited budget. This
kit will support all the features to pass your CCNA and give you a start on your
CCNP certification. The 2600XM series is going to support 12.4, IPv6 and
SDM. We include a 2620XM router and a 2611XM router which is dual 100mb
Etherent. Thus you will be able to set this up as a Cable/DSL Router
too. The 2620XM will house the NM-4A/S and act as your frame-relay
router. The 2500 series unit can be used in a few different ways and will
support IPv6. The two 2950s will be your main 12.x switches and you will
get a 2924 that will round out your switch Domain. No one else has our
copyrighted 224 page CiscoKits Self Study CCNA Lab Workbook that will walk
you through 60 different labs! Why spend hundreds of dollars on a lab kit if you
don't have the labs to accompany your equipment? Other kits don't have console
kits, transceivers, back to back cables or the latest software. You will also
get our CiscoKits CCNA/CCNP Test
Engine with over 500 different questions. Not only that, but you
will also get CCNA test tips, the IOS on CD, Cisco's TFTP Server and other prep
material. There
is also more! You will also receive our CiscoKits CCNA CRAM Sheet. This six page, full
color, laminated foldout is a great addition to your CCNA Study
arsenal. Finally, you will also get our
CiscoKits CCNA TCP/IP Study Poster. These routers are
in excellent condition and are guaranteed working! The extra information
provided on CD is worth $200 by itself. You will be provided with everything you
need to hit the ground running to prepare for your test. No need to spend hours
looking for tools, procedures, test review material or fumbling around looking
for labs. This is a great educational lab kit. Software licensing is the
responsibility of the buyer and is provided on the CD only as a backup of what
was loaded on the router when we purchased it.
Tested and Guaranteed working!
One 2611XM 128/32 dual 100mb Ethernet Router for 12.4, IPv6
& SDM
One 2620XM 128/32 Router supporting 12.4, IPv6 & SDM
One 2501 16/16 with transceiver supporting 12.3 and IPv6
One 2924 Series(2924 or 2924-M)100mb Switch supporting Enterprise 12.0.05
Two 2950 switches!!
One WIC-1T Serial Module
One NM-4A/S Module for Frame-Relay
Two Back to Back Cables
Console Cable Kit
Six Power Cables
30 Day Warranty!
Additional Items
Include:
CiscoKits CCNA Lab Workbook($29.99 value)
CiscoKits CCNA CRAM Sheet($14.99
value)
CiscoKits CCNA TCP/IP Poster($9.99 value)
12.4 IOS on CD for the XM Routers
12.3 IOS for the 2500
12.0.05 Enterprise IOS for the 2924
CiscoKits CCENT Test Engine
CiscoKits ICND1 & 2 Test Engine
CiscoKits CCNA Test Engine($29.99 value)
CiscoKits BSCI Test Engine
CiscoKits BCSMN Test Engine
CiscoKits CCNP ISCW Test Engine
CiscoKits CCNP ONT Test Engine
50+ articles covering Cisco concepts
TFTP Server
Subnet Calculator Trial Tools
Port Scanner Trial Tool
Password Recovery Trial Tool
CCNP PIX Firewall & IDS Tools
CCNP IOS Configuration Editor Trial Tools
CCNP Router & Switch Simulator Trials
CCNP Network Design Trial Tools
CCNP Network Protocol Analyzer Trial Tools
CCNP VOIP Packet Sniffer Trial Tools