As you may know, the new CCNP test requires IOS 12.4 which the cheaper routers do not support so you will need to step up to the 2600XM series. So understanding that you may want an advanced CCNA lab kit that you can use as a starter CCNP kit, we developed this kit for those on a limited budget. This kit will support all the features to pass your CCNA and give you a start on your CCNP certification. The 2600XM series is going to support 12.4, IPv6 and SDM.  We include a 2620XM router and a 2611XM router which is dual 100mb Etherent.  Thus you will be able to set this up as a Cable/DSL Router too.  The 2620XM will house the NM-4A/S and act as your frame-relay router.  The 2500 series unit can be used in a few different ways and will support IPv6. In this kit we have a 3550 Layer 3 switch which I think you will find is really, really, really cool!  It basically means it can do routing just like a router too!  Additionally you will get a 2950 and 2924 switch that will round out your switch Domain.

No one else has our copyrighted 224 page CiscoKits Self Study CCNA Lab Workbook that will walk you through 60 different labs! Why spend hundreds of dollars on a lab kit if you don't have the labs to accompany your equipment? Other kits don't have console kits, transceivers, back to back cables, ethernet patch cables, crossover cables, or the latest software. You will also get our CiscoKits CCNA/CCNP Test Engine with over 500 different questions. Not only that, but you will also get CCNA test tips, the IOS on CD, Cisco's TFTP Server and other prep material.  There is also more!  You will also receive our CiscoKits CCNA CRAM Sheet.  This six page, full color, laminated foldout is a great addition to your CCNA Study arsenal.  You will also receive our CCNA CBT Training!  This computer based training comprises 44 videos with over 22 hours covering all CCNA topics and is a $225 value!  Finally, you will also get our CiscoKits CCNA TCP/IP Study Poster.  These routers are in excellent condition and are guaranteed working! The extra information provided on CD is worth $200 by itself. You will be provided with everything you need to hit the ground running to prepare for your test. No need to spend hours looking for tools, procedures, test review material or fumbling around looking for labs. This is a great educational lab kit. Software licensing is the responsibility of the buyer and is provided on the CD only as a backup of what was loaded on the router when we purchased it.